Encoder vs Decoder

Posted September 10, 2022 by Rohith and Anusha ‐ 1 min read

An encoder is a mechanism that can transform the data signal into a message that can be read by some type of control device. The combinational circuits that convert the binary data into 2N output lines are called Decoders.

Difference between Encoder and Decoder are stated below

ENCODERDECODER
The combinational circuits that modify the binary data into N output lines are known as Encoders.The combinational circuits that convert the binary data into 2N output lines are called Decoders.
In this the output lines are n.In this the output lines are 2n.
The implemented signal is considered as actual signal input.It receives coded binary data as its input.
It is utilized in videos, E-mail, and more.It is mostly utilized in memory chips, microprocessors, and more.
When it comes to the communication mode, the encoder is situated at the transmitting end.Here, the decoder is situated at the receiving side.
The operating procedure is quite simple here.The operating procedure is complex.
quick-references blog encoder decoder differences

Subscribe For More Content